900W Hot Melt Glue Gun - High Power Adhesive Dispenser for DIY, Crafts, Woodworking & Industrial Bonding | Fast Heating Spray Gluing Machine for Home Repairs & Packaging

Hot melt glue dispensers are widely used in: toys (bonding, fixing, wiring, insulation), sealing. Packaging; handbags skin bags; small appliances. Wires. Connectors. Connectors; audio. Photo frame: identification labels; Small paper products are bonded and fixed; small ornaments, crafts, hairpins, water polo, etc.; electronic products are fixed. Adhesive. Insulation; other manual or semi-automatic use of glue is required. Features： Model: X001 Power: 900W Sol speed: 3KG/HR Solvent capacity: 3KG/HR Maximum viscosity; 10000 CPS Working temperature: 160-180°C Temperature control range: 0-300°C safety precaution: Always wear safety gloves, goggles, and long-sleeved overalls to avoid burns from hot liquid hot melt adhesive 1. The gas circuit should avoid too much water vapor entering 2. The hot melt adhesive capacity must not exceed seven p 3.The maximum total air pressure is set to 4KG 4. Before heating the melted glue, the pressure of the storage bucket must be released first. Preparation for operation: 1. Confirm the safety protection measures 2. Check if the machine is 110VAC and there is no fluctuation in the pressure 3. See if the temperature of the plastic bucket is set at about 170 degrees (different hot melt adhesives have different softening points. For specific setting values, refer to the data provided by the hot melt adhesive supplier) 5. Check whether the foot switch is connected and whether any conductive objects have touched the components in the electric control box. 6. Check if the air supply system is basically dry and the air pressure is stable 7. Power on and test the circuit of each part.